FlexiCAM » Machines » 5 Axis CNC Router » Piranha CNC Router (5 Axis)

Piranha CNC Router (5 Axis)

  • Space-saving fixed table - moving gantry design for small machine footprint
  • Welded, stress relieved and machined all-steel baseframe, gantry and gantry feet
  • Steel structures are reinforced with heavy ribs to resist flex and dampen vibrations
  • Overhead gantry design without vertical columns to minimize deflection, distortion, or vibration, for rapid movements and a maximum overall volumetric accuracy
  • Rigid Z-ram with large bearing spacing for fast positioning and accurate machining with low vibrations at long Z-strokes
  • Each machine design is efficiently optimized and validated by using Finite Element Analysis (FEA) to ensure quality, performance, and safety
  • Easy all-side access for material loading by forklift or overhead crane
  • Electronics and mechanical drives are located outside the machining envelope to prevents their potential contamination from wet or dry machining
  • High preload profiled linear bearings with cover strips and additional scapers on all axis
  • Brushless digital A/C servo drives and motors on all axis
  • Dual side drive and synchronised X-axis; no twist under load like applicable to a single center-mounted ballscrew or cantilevered design
  • Helical rack and pinion drive system on all axis
  • Low-backlash planetary gear boxes
  • Fully closed cable carriers prevent the cables from damage by chips and fine dust
  • High quality, shielded cables for energy chains are a guarantee of reliability
  • Z-axis clearance 2,000 mm or customer specific
  • Z-axis travel customer specific
  • Maximum axis speed 100 m/min (1,000 mm/s) depending on controller, motors and drives
  • Network connection via Ethernet (optional Wireless)
  • Remote Administration via Internet
  • 3.080 x 2.040 mm (Model 2030)
  • 4.080 x 2.040 mm (Model 2040)
  • 5.080 x 2.040 mm (Model 2050)
  • 6.080 x 2.040 mm (Model 2060)
  • 3.080 x 2.540 mm (Model 2530)
  • 4.080 x 2.540 mm (Model 2540)
  • 5.080 x 2.540 mm (Model 2550)
  • 6.080 x 2.540 mm (Model 2560)
  • Custom table sizes are available on request
  • FlexiCAM 5-Axis Bi-Rotational Spindle Unit with Spindle 8 KW, 24,000 RPM, ISO-30
  • FlexiCAM 5-Axis Bi-Rotational Spindle Unit with Spindle 12 KW, 24,000 RPM, HSK-63F
  • FlexiCAM 5-Axis Bi-Rotational Spindle Unit with Spindle 18 KW, 24,000 RPM, HSK-63F
  • FlexiCAM 5-Axis Bi-Rotational Spindle Unit with Spindle 8 KW, 36,000 RPM, HSK-40E
  • FlexiCAM 5-Axis Bi-Rotational Spindle Unit with Spindle 1.5 KW, 40,000 RPM, ISO-20 or HSK-32E
  • HSD HS 300 5-Axis Bi-Rotational Spindle Unit with Spindle ES 368 (8.7 or 11 KW, 20,000 RPM, HSK-63F)
  • HSD HS 655 5-Axis Bi-Rotational Spindle Unit with Spindle ES 779 (12 KW, 24,000 RPM, HSK-63F)
  • HSD HS 655 5-Axis Bi-Rotational Spindle Unit with Spindle ES 789 (18 KW, 24,000 RPM, HSK-63F)
  • Custom bi-rotational-spindle-units and spindles are available on request