FlexiCAM » Machines » CNC Router 3 and 4 Axis » XXL CNC Router

XXL CNC Router

  • Space-saving fixed table - moving gantry design for small machine footprint
  • Single structure welded, stress relieved and machined all-steel baseframe, gantry and gantry feet
  • Steel structures are reinforced with heavy ribs to resist flex and dampen vibrations
  • Each machine design is efficiently optimized and validated by using Finite Element Analysis (FEA) to ensure quality, performance, and safety
  • Open machine bed for easy loading and unloading by forklift or overhead crane
  • High preload profiled linear bearings with cover strips and additional scapers on all axis
  • Brushless digital A/C servo drives and motors on all axis
  • Dual side drive and synchronised X-axis; no twist under load like applicable to a single center-mounted ballscrew or cantilevered design
  • Helical rack and pinion drive system on X and Y axis
  • High precision ballscrew on Z axis (anchored at both ends)
  • Low-backlash planetary gear boxes
  • Fully closed cable carriers prevent the cables from damage by chips and fine dust
  • High quality, shielded cables for energy chains are a guarantee of reliability
  • Z-axis clearance 200 mm, optional 280 mm or 400 mm
  • Z-axis travel 280 mm, optional 480 mm
  • Maximum axis speed 100 m/min (1,000 mm/s) depending on controller, motors and drives
  • Network connection via Ethernet (optional Wireless)
  • Remote Administration via Internet
    • 1,540 mm (XXL 15xx)
    • 2,040 mm (XXL 20xx)
    • 2,540 mm (XXL 25xx)
    • 3,040 mm (XXL 30xx)
    • 3,540 mm (XXL 35xx)
    • 4,040 mm (XXL 40xx)

The available lengths starts at 3,080 mm and increases in 1,000 mm increments, e.g.

  • 3,080 mm (XXL xx30)
  • 4,080 mm (XXL xx40)
  • 5,080 mm (XXL xx50)
  • 6,080 mm (XXL xx60)
  • 8,080 mm (XXL xx80)
  • 10,080 mm (XXL xx100)
  • 12,080 mm (XXL xx120) etc.